Posted on

Best Way To Fix Error Message 207 – Memory Initialization Error On CPU 2, Dimming Problems 6

In this blog post, we are going to uncover some of the possible reasons that might cause error message 207 memory initialization error on 2 dimm 6 processor and after that, we will provide possible fixes that you can try to solve this problem.


  • 1. Download ASR Pro
  • 2. Follow the on-screen instructions to run a scan
  • 3. Restart your computer and wait for it to finish running the scan, then follow the on-screen instructions again to remove any viruses found by scanning your computer with ASR Pro
  • Speed up your PC today with this easy-to-use download.

    I said that the problem is with the same server, a specific DL380 G6, on 6 slots, 9 of them on one machine and about 6 slots on another.

    I’m using the HP memory listed in the comparison, part number 500656-B21.

    I updated the BIOS very heavily, wrongly thinking it would work, but unfortunately it didn’t.

    post error 207-memory initialization error on processor 2 dimm 6

    Out of 27 servers, 4 have this and an error, the remaining 25 are fine.

    Here, CentricsIT, we are your experienced IT professionals. If your data center has an IT maintenance issue, we are here to advise and take action. If there’s a code bug that you can’t fix, let us help you with the monthly FixIT column. Thirty days have passed and we are focused on the HP Memory 207 initialization error.

    Memory initialization error 207 may well occur during the boot process and be accompanied by several loud beeps. In addition to some basic error messages, the display may also show processor memory information and typical dimming effects.

    What Causes HP Memory 207 Initialization Error?

  • Memory panelUsually installed incorrectly or may be defective.
  • Dirty or damaged processor
  • PC location corrupted
  • How To Fix HP Memory 207 Initialization Error?

    The following steps should be taken to resolve the error and restore system functionality

    1. Turn off the host server and check if the storage space is set in the slot.
    2. If, upon inspection, you find that a broken frame has narrow slots, try replacing it with a working frame.
    3. Turn on the server after a specific memory swap and check if the memory error still occurs.
    4. If so, make sure the error shows the original bad location rendered when it now reflects the location associated with the original fade.
    5. If the error is still location dependent, it’s possible that the problem is with the processor or the card.
    6. Once you have determined that memory reduction is working properly, you should shut down the system and remove the processor.
    7. Make sure the processor is now clean and has no appearance my damage.
    8. If there is no visible damage, replace the failed processor with a new one.
    9. If you have a two-processor system, swap their processors.
    10. Turn on the system to see if the error persists.
    11. If a regular processor continues to show a fatal error, it should be replaced in a new slot.
    12. If this particular error is reflected in the original configuration, the processor slot is damaged and the system will need to install a new motherboard if it is working properly.

    If you have additional questions about HP and firmware updates, please contact our experienced IT support team by calling our agents toll-free at 1 (877) 531-7466. CentricsIT offers data center services, including data center equipment maintenance, and we can help you get the most out of your data center, no matter how small.

    This is my first post here, but Homelab has been for a while. 🙂


    Is your PC running slow? Do you have problems starting up Windows? Don't despair! ASR Pro is the solution for you. This powerful and easy-to-use tool will diagnose and repair your PC, increasing system performance, optimizing memory, and improving security in the process. So don't wait - download ASR Pro today!

  • 1. Download ASR Pro
  • 2. Follow the on-screen instructions to run a scan
  • 3. Restart your computer and wait for it to finish running the scan, then follow the on-screen instructions again to remove any viruses found by scanning your computer with ASR Pro

  • A few days ago I received an HP Gen8 dl360e at an auctioneBay affiliate network. It has 2 x E5-2450L, 32 GB (8 RAM x 4 GB), no hard drives (SFF) yet.

    I check them on boot, but nothing but reset or reboot, presumably on cold boot:

    207-Error initializing memory in processor socket 1 1. The operating system may not have access to all the memory installed in the system.

    This repeats the socket 4 times (same CPU) followed by at least 2 beeps, then the server boots in winter, but… since then slots 1 and 2 are not normally used (according to iLO) . I think it has to do with the fact that they are in the exact channel?

  • Firmware update for each of ours (with BIOS P73 dated 08/02/2014, I believe the latest)

  • Reset all if you want to restore default settings

  • Reinstall the RAM module and take care of the DIMM slot

  • Changed the RAM stroke of another CPU, the funny thing is that the error remained the same (CPU 1 Socket 1)

  • The odd thing is that this only happens on a system reset/restart, not on a cold boot or normal power up. Although all memory is HP branded, iLosays something that it’s not HP (HPE Memory Memory = No).

    post error 207-memory initialization error on processor 2 dimm 6

    In addition, the fan speed never drops below 25-26%. Is this a common occurrence for DL360e Gen8 processors? 2 The temperature in outer space is 21 degrees (70 degrees Fahrenheit at these points). I have both 460W PSUs plugged in and working, no real PCIe cards or hard drives in the main system.

    Problem detected. Of the 8 RAM modules, some were available in different shades of green (image link below). So I completely removed everything that was involved, and what you know, you won’t have any more errors. When I first swapped modules between CPU 1 and 2, I swapped two of those bad ones, so our own error was still visible on CPU 1.

    Speed up your PC today with this easy-to-use download.

    Melhor Maneira De Corrigir A Mensagem De Erro 207 – Erro De Inicialização De Memória Na CPU 2, Problemas De Escurecimento 6
    La Mejor Manera De Corregir El Mensaje De Error 207: Error De Inicialización De Memoria En La CPU 2, Problemas De Atenuación 6
    Najlepszy Sposób Na Naprawienie Komunikatu O Błędzie 207 – Błąd Inicjalizacji Pamięci Na CPU 2, Problemy Ze ściemnianiem 6
    Лучший способ исправить сообщение об ошибке 207 — ошибка инициализации памяти на ЦП 2, проблемы затемнения 6
    Il Modo Migliore Per Correggere Il Messaggio Di Errore 207 – Errore Di Inizializzazione Della Memoria Sulla CPU 2, Problemi Di Attenuazione 6
    Meilleur Moyen De Corriger Le Message D’erreur 207 – Erreur D’initialisation De La Mémoire Sur Le Processeur 2, Problèmes De Gradation 6
    오류 메시지 207을 수정하는 가장 좋은 방법 – CPU 2의 메모리 초기화 오류, 디밍 문제 6
    Bästa Sättet Att Fixa Felmeddelande 207 – Minnesinitieringsfel På CPU 2, Dimningsproblem 6
    Beste Manier Om Foutmelding 207 Op Te Lossen – Geheugeninitialisatiefout Op CPU 2, Dimproblemen 6
    Beste Möglichkeit, Fehlermeldung 207 Zu Beheben – Speicherinitialisierungsfehler Auf CPU 2, Dimmprobleme 6