Fixed: How To Fix Shuttle Xh61v BIOS Settings
Occasionally, a message may appear on your computer indicating the Shuttle xh61v BIOS settings. There can be several reasons for this error to appear. Windows logo key + S -> Type cmd in the search box -> Click Command Prompt.Type wmic bios get smbiosbiosversion -> Enter -> Check the BIOS version group.
Start your computer and press the [DEL] or [F2] key during boot to enter the BIOS installer. BIOS version is displayed on the second line of the main screen.
However, on many modern PCs, the current XPC shuttle does not have BIOS at all and instead uses its own UEFI firmware. The terms UEFI and BIOS firmware are often confused, but the actual hardware initialization is done by UEFI. Users may not even notice it, but a working system must be installed and running in UEFI mode. UEFI creates a convenient GUID Partition Table (GPT) on some system partitions instead of per-boot record (MBR) management. A PC running only UEFI clean firmware must be running a basic 64-bit operating system.
Where Exactly, How To Clear CMOS?
CMOS clear button on the back of the device (small hole at bottom right)
CMOS clear button associated with the back of the coffee maker (small hole in the top left).
Four clips on Rear of the machine (pull out the power cord and short it out with a Phillips screwdriver)
This is a feature on the motherboard that normally protects the BIOS from accidental placement. This is called BIOS flash prevention. Also disable this feature due to setting a hardware jumper using the CMOS configuration utility. Please read the manual for details on how to disable display protection.
How do I flash UEFI?
Download the latest BIOS (or UEFI) from the manufacturer’s website.Unzip it and copy it to a spare USB drive.Restart your computer and login as BIOS/UEFI.Directly use the menu to update the BIOS/UEFI.
Warning. Make sure that no other USB devices, such as external hard drives, external optical devices, or USB keys, are simply connected to your system during formatting. This ensures that you only format the specific type of USB flash drive you choose.
Please run Rufus.exe.
Select your USB flash drive and press the start button, just confirm the following warning window.
How do I get to bios shuttle?
Please start your computer and accurately press the [DEL] or [F2] key at boot to actually enter the BIOS setup program. The BIOS version is displayed on this special second line of the main LCD monitor.
Unpack the ZIP archive into a file and empty the folder.
Copy the DOS subfolder to the USB boot drive with DOS.Boot
from most USB drives and navigate to the “DOS” subfolder.
Run the FLASH.BAT file.
The update process will start automatically. The system will restart automatically.
As you can see, once the computer is ready, run the BIOS installer by pressing “Remove” or “F2” and load “Default” the most important. . Settings” (F3), then confirm by pressing “Save and Exit”.
Extract the ZIP file to an old folder.
Copy the subfolders “EFI”, “SHELL” and place “startup.nsh” on a specific USB key formatted in FAT32.
Boot from the USB key. The update will start automatically. The system may restart automatically.
Once the reboot is complete, enter the BIOS setup procedure by pressing the “Delete” and “F2” keys on the other side and “Load Defaults” (F3), then confirm by pressing “Save” and Exit.
Insert the USB Adobe Flash drive into one of the connected USB ports.
Press ESC (or F11 or F7) during boot to access the boot menu.